A slitting machine should be selected around the material you actually run, the rolls you receive and the strips you need to deliver. A quoted maximum width or motor rating is only one part of the decision. Before comparing models, prepare a sample roll and write down the requirements below.
1. Describe the incoming material
Record the fabric or flexible material, thickness, surface finish and whether it stretches, frays or carries an adhesive. Include the core diameter, roll width, outside diameter and maximum roll weight. If several materials share a line, identify the most difficult one and ask for a trial with that material. A cut that looks clean on one fabric may behave differently on another.
2. Define the finished strip
Specify the target strip widths, acceptable variation, edge appearance and how the finished material will be used. Ask whether the machine is expected to cut a parent roll into narrower rolls, produce loose strips, or cut and bundle in one process. These are different handling tasks, even when the word “slitting” is used for all of them.
3. Check roll capacity as a set
Working width, roll diameter, core size and weight need to fit together. Yuancheng's listed YC-1700C double-blade model has a 1,700 mm working width and a stated 38–320 mm roll-diameter range. The YC-1700D large-roll model is also listed at 1,700 mm working width but with a 38–600 mm roll-diameter range. Those catalog figures are useful starting points, not a substitute for confirming your full roll specification with the factory.
4. Review the whole workflow
Think through loading, edge alignment, blade setting, unloading and the next operation. If the material needs inspection before cutting, plan where that step sits. If the final order requires neat rolls or bundles, discuss how they will be collected and labeled. A machine that cuts correctly but slows every changeover may still be the wrong fit for short production runs.
5. Ask for a sample-based acceptance test
Send representative material and request photos or video of the cut edge, width checks and finished roll or bundle. Agree on test settings, operator training, spare blades, electrical supply and delivery documentation before placing an order. Confirm any optional working width or custom configuration in the quotation.
For a useful recommendation, send Yuancheng the material type, incoming roll dimensions, target strip widths, preferred output form and your factory voltage. The team can then discuss the suitable machine configuration rather than guessing from a model name alone.